KNOWLEDGE
FACTORY TRAINED OTJ EXPERIENCE ENGINEERING SUPPORT
FLOWLINE BAG FILTER HOUSINGS
The
FLOWLINE model bag filter housing is an "economy" version of the
SIDELINE bag filter housing and should
be considered when ASME code stamping is not required. If you
require an ASME code stamp, CRN or steam jacketing, the
SIDELINE or
TOPLINE models should be chosen.
The FLOWLINE filter housing is applicable
for all nominal micron retentions, if you require a specified
efficiency (99% efficient) filter media, you should use the
TOPLINE design.
Each FLOWLINE bag filter housing has a swing
bolt cover which can be hinged in any one of four positions.
The cover itself is what is referred to as an "evacuation cover" - a
concave design that reduces the ullage (empty space) within the
filter housing. The advantage is twofold; there's less
"wasted fluid" during a bag change and the fluid level ends up lower
in the housing to reduce spillage once the cover is opened.
The cover is an investment cast component,
ensuring precise, reliable sealing with concentric downwards
pressure onto the bag hold-down ring.
The restrainer (support) basket is made of
316SS and has 9/64" perforations. FLOWLINE bag filters also
come with adjustable epoxy powder coated steel mounting legs.
Flexibility in flow configuration
The FLOWLINE bag filter outlet can be placed at the
bottom, at the opposite side or even the same size ("loop") positions
depending upon which orientation fits your application best.
If you are not sure which type of filter
housing would be most appropriate for your application,
please
fill out our Filter Housing Inquiry Form and we'll reply within
1
business day.